Oracle

1. Explain the difference between a hot backup and a cold backup and the benefits associated with each.

A hot backup is basically taking a backup of the database while it is still up and running and it must be in archive log mode. A cold backup is taking a backup of the database while it is shut down and does not require being in archive log mode. The benefit of taking a hot backup is that the database is still available for use while the backup is occurring and you can recover the database to any point in time. The benefit of taking a cold backup is that it is typically easier to administer the backup and recovery process. In addition, since you are taking cold backups the database does not require being in archive log mode and thus there will be a slight performance gain as the database is not cutting archive logs to disk.

2. You have just had to restore from backup and do not have any control files. How would you go about bringing up this database?

I would create a text based backup control file, stipulating where on disk all the data files where and then issue the recover command with the using backup control file clause.

3. How do you switch from an init.ora file to a spfile?

Issue the create spfile from pfile command.

4. Explain the difference between a data block, an extent and a segment.

A data block is the smallest unit of logical storage for a database object. As objects grow they take chunks of additional storage that are composed of contiguous data blocks. These groupings of contiguous data blocks are called extents. All the extents that an object takes when grouped together are considered the segment of the database object.

5. Give two examples of how you might determine the structure of the table DEPT.

Use the describe command or use the dbms_metadata.get_ddl package.

6. Where would you look for errors from the database engine?

In the alert log.

7. Compare and contrast TRUNCATE and DELETE for a table.

Both the truncate and delete command have the desired outcome of getting rid of all the rows in a table. The difference between the two is that the truncate command is a DDL operation and just moves the high water mark and produces a now rollback. The delete command, on the other hand, is a DML operation, which will produce a rollback and thus take longer to complete.

8. Give the reasoning behind using an index.

Faster access to data blocks in a table.

9. Give the two types of tables involved in producing a star schema and the type of data they hold.

Fact tables and dimension tables. A fact table contains measurements while dimension tables will contain data that will help describe the fact tables.

10. . What type of index should you use on a fact table?

A Bitmap index.

11. Give two examples of referential integrity constraints.

A primary key and a foreign key.

12. A table is classified as a parent table and you want to drop and re-create it. How would you do this without affecting the children tables?

Disable the foreign key constraint to the parent, drop the table, re-create the table, enable the foreign key constraint.

13. Explain the difference between ARCHIVELOG mode and NOARCHIVELOG mode and the benefits and disadvantages to each.

ARCHIVELOG mode is a mode that you can put the database in for creating a backup of all transactions that have occurred in the database so that you can recover to any point in time. NOARCHIVELOG mode is basically the absence of ARCHIVELOG mode and has the disadvantage of not being able to recover to any point in time. NOARCHIVELOG mode does have the advantage of not having to write transactions to an archive log and thus increases the performance of the database slightly.

14. What command would you use to create a backup control file?

Alter database backup control file to trace.

15. Give the stages of instance startup to a usable state where normal users may access it.

STARTUP NOMOUNT - Instance startup

STARTUP MOUNT - The database is mounted

STARTUP OPEN - The database is opened

16. What column differentiates the V$ views to the GV$ views and how?

The INST_ID column which indicates the instance in a RAC environment the information came from.

17. How would you go about generating an EXPLAIN plan?

Create a plan table with utlxplan.sql.

Use the explain plan set statement_id = 'tst1' into plan_table for a SQL statement

Look at the explain plan with utlxplp.sql or utlxpls.sql

18. How would you go about increasing the buffer cache hit ratio?

Use the buffer cache advisory over a given workload and then query the v$db_cache_advice table. If a change was necessary then I would use the alter system set db_cache_size command.

19. Explain an ORA-01555

You get this error when you get a snapshot too old within rollback. It can usually be solved by increasing the undo retention or increasing the size of rollbacks. You should also look at the logic involved in the application getting the error message.

20. Explain the difference between $ORACLE_HOME and $ORACLE_BASE.

ORACLE_BASE is the root directory for oracle. ORACLE_HOME located beneath ORACLE_BASE is where the oracle products reside.

21. How would you determine the time zone under which a database was operating?

select DBTIMEZONE from dual;

22. Explain the use of setting GLOBAL_NAMES equal to TRUE.

Setting GLOBAL_NAMES dictates how you might connect to a database. This variable is either TRUE or FALSE and if it is set to TRUE it enforces database links to have the same name as the remote database to which they are linking.

23. What command would you use to encrypt a PL/SQL application?

WRAP

24. Explain the difference between a FUNCTION, PROCEDURE and PACKAGE.

A function and procedure are the same in that they are intended to be a collection of PL/SQL code that carries a single task. While a procedure does not have to return any values to the calling application, a function will return a single value. A package on the other hand is a collection of functions and procedures that are grouped together based on their commonality to a business function or application.

25. Explain the use of table functions.

Table functions are designed to return a set of rows through PL/SQL logic but are intended to be used as a normal table or view in a SQL statement. They are also used to pipeline information in an ETL process.

26. Name three advisory statistics you can collect.

Buffer Cache Advice, Segment Level Statistics, & Timed Statistics

27. Where in the Oracle directory tree structure are audit traces placed?

In unix $ORACLE_HOME/rdbms/audit, in Windows the event viewer

28. Explain materialized views and how they are used.

Materialized views are objects that are reduced sets of information that have been summarized, grouped, or aggregated from base tables. They are typically used in data warehouse or decision support systems.

29. When a user process fails, what background process cleans up after it?

PMON

30. What background process refreshes materialized views?

The Job Queue Processes.

31. How would you determine what sessions are connected and what resources they are waiting for?

Use of V$SESSION and V$SESSION_WAIT

32. Describe what redo logs are.

Redo logs are logical and physical structures that are designed to hold all the changes made to a database and are intended to aid in the recovery of a database.

33. How would you force a log switch?

ALTER SYSTEM SWITCH LOGFILE;

34. Give two methods you could use to determine what DDL changes have been made.

You could use Logminer or Streams

35. What does coalescing a tablespace do?

Coalescing is only valid for dictionary-managed tablespaces and de-fragments space by combining neighboring free extents into large single extents.

36. What is the difference between a TEMPORARY tablespace and a PERMANENT tablespace?

A temporary tablespace is used for temporary objects such as sort structures while permanent tablespaces are used to store those objects meant to be used as the true objects of the database.

37. Name a tablespace automatically created when you create a database.

The SYSTEM tablespace.

38. When creating a user, what permissions must you grant to allow them to connect to the database?

Grant the CONNECT to the user.

39. How do you add a data file to a tablespace?

ALTER TABLESPACE  ADD DATAFILE  SIZE

40. How do you resize a data file?

ALTER DATABASE DATAFILE  RESIZE ;

41. What view would you use to look at the size of a data file?

DBA_DATA_FILES

42. What view would you use to determine free space in a tablespace?

DBA_FREE_SPACE

43. How would you determine who has added a row to a table?

Turn on fine grain auditing for the table.

44. How can you rebuild an index?

ALTER INDEX  REBUILD;

45. Explain what partitioning is and what its benefit is.

Partitioning is a method of taking large tables and indexes and splitting them into smaller, more manageable pieces.

46. You have just compiled a PL/SQL package but got errors, how would you view the errors?

SHOW ERRORS

47. How can you gather statistics on a table?

The ANALYZE command.

48. How can you enable a trace for a session?

Use the DBMS_SESSION.SET_SQL_TRACE or

Use ALTER SESSION SET SQL_TRACE = TRUE;

49. What is the difference between the SQL*Loader and IMPORT utilities?

These two Oracle utilities are used for loading data into the database. The difference is that the import utility relies on the data being produced by another Oracle utility EXPORT while the SQL*Loader utility allows data to be loaded that has been produced by other utilities from different data sources just so long as it conforms to ASCII formatted or delimited files.

50. Name two files used for network connection to a database.

TNSNAMES.ORA and SQLNET.ORA

Technical - UNIX

Every DBA should know something about the operating system that the database will be running on. The questions here are related to UNIX but you should equally be able to answer questions related to common Windows environments.

1. How do you list the files in an UNIX directory while also showing hidden files?

ls -ltra

2. How do you execute a UNIX command in the background?

Use the "&"

3. What UNIX command will control the default file permissions when files are created?

Umask

4. Explain the read, write, and execute permissions on a UNIX directory.

Read allows you to see and list the directory contents.

Write allows you to create, edit and delete files and subdirectories in the directory.

Execute gives you the previous read/write permissions plus allows you to change into the directory and execute programs or shells from the directory.

5. the difference between a soft link and a hard link?

A symbolic (soft) linked file and the targeted file can be located on the same or different file system while for a hard link they must be located on the same file system.

6. Give the command to display space usage on the UNIX file system.

df -lk

7. Explain iostat, vmstat and netstat.

Iostat reports on terminal, disk and tape I/O activity.

Vmstat reports on virtual memory statistics for processes, disk, tape and CPU activity.

Netstat reports on the contents of network data structures.

8. How would you change all occurrences of a value using VI?

Use :%s///g

9. Give two UNIX kernel parameters that effect an Oracle install

SHMMAX & SHMMNI

10. Briefly, how do you install Oracle software on UNIX.

Basically, set up disks, kernel parameters, and run orainst.

1. To see current user name
Sql> show user;

2. Change SQL prompt name
SQL> set sqlprompt “Manimara > “
Manimara >
Manimara >

3. Switch to DOS prompt
SQL> host

4. How do I eliminate the duplicate rows ?
SQL> delete from table_name where rowid not in (select max(rowid) from table group by duplicate_values_field_name);
or
SQL> delete duplicate_values_field_name dv from table_name ta where rowid <(select min(rowid) from table_name tb where ta.dv=tb.dv);
Example.
Table Emp
Empno Ename
101 Scott
102 Jiyo
103 Millor
104 Jiyo
105 Smith
delete ename from emp a where rowid < ( select min(rowid) from emp b where a.ename = b.ename);
The output like,
Empno Ename
101 Scott
102 Millor
103 Jiyo
104 Smith

5. How do I display row number with records?
To achive this use rownum pseudocolumn with query, like SQL> SQL> select rownum, ename from emp;
Output:
1 Scott
2 Millor
3 Jiyo
4 Smith

6. Display the records between two range
select rownum, empno, ename from emp where rowid in
(select rowid from emp where rownum <=&upto
minus
select rowid from emp where rownum<&Start);
Enter value for upto: 10
Enter value for Start: 7

ROWNUM EMPNO ENAME
--------- --------- ----------
1 7782 CLARK
2 7788 SCOTT
3 7839 KING
4 7844 TURNER

7. I know the nvl function only allows the same data type(ie. number or char or date Nvl(comm, 0)), if commission is null then the text “Not Applicable” want to display, instead of blank space. How do I write the query?

SQL> select nvl(to_char(comm.),'NA') from emp;

Output :

NVL(TO_CHAR(COMM),'NA')
-----------------------
NA
300
500
NA
1400
NA
NA

8. Oracle cursor : Implicit & Explicit cursors
Oracle uses work areas called private SQL areas to create SQL statements.
PL/SQL construct to identify each and every work are used, is called as Cursor.
For SQL queries returning a single row, PL/SQL declares all implicit cursors.
For queries that returning more than one row, the cursor needs to be explicitly declared.

9. Explicit Cursor attributes
There are four cursor attributes used in Oracle
cursor_name%Found, cursor_name%NOTFOUND, cursor_name%ROWCOUNT, cursor_name%ISOPEN

10. Implicit Cursor attributes
Same as explicit cursor but prefixed by the word SQL

SQL%Found, SQL%NOTFOUND, SQL%ROWCOUNT, SQL%ISOPEN

Tips : 1. Here SQL%ISOPEN is false, because oracle automatically closed the implicit cursor after executing SQL statements.
: 2. All are Boolean attributes.

11. Find out nth highest salary from emp table
SELECT DISTINCT (a.sal) FROM EMP A WHERE &N = (SELECT COUNT (DISTINCT (b.sal)) FROM EMP B WHERE a.sal<=b.sal);

Enter value for n: 2
SAL
---------
3700

12. To view installed Oracle version information
SQL> select banner from v$version;

13. Display the number value in Words
SQL> select sal, (to_char(to_date(sal,'j'), 'jsp'))
from emp;
the output like,

SAL (TO_CHAR(TO_DATE(SAL,'J'),'JSP'))
--------- -----------------------------------------------------
800 eight hundred
1600 one thousand six hundred
1250 one thousand two hundred fifty
If you want to add some text like,
Rs. Three Thousand only.
SQL> select sal "Salary ",
(' Rs. '|| (to_char(to_date(sal,'j'), 'Jsp'))|| ' only.'))
"Sal in Words" from emp
/
Salary Sal in Words
------- ------------------------------------------------------
800 Rs. Eight Hundred only.
1600 Rs. One Thousand Six Hundred only.
1250 Rs. One Thousand Two Hundred Fifty only.

14. Display Odd/ Even number of records
Odd number of records:
select * from emp where (rowid,1) in (select rowid, mod(rownum,2) from emp);
1
3
5
Even number of records:
select * from emp where (rowid,0) in (select rowid, mod(rownum,2) from emp)
2
4
6

15. Which date function returns number value?
months_between

16. Any three PL/SQL Exceptions?
Too_many_rows, No_Data_Found, Value_Error, Zero_Error, Others

17. What are PL/SQL Cursor Exceptions?
Cursor_Already_Open, Invalid_Cursor

18. Other way to replace query result null value with a text
SQL> Set NULL ‘N/A’
to reset SQL> Set NULL ‘’

19. What are the more common pseudo-columns?
SYSDATE, USER , UID, CURVAL, NEXTVAL, ROWID, ROWNUM

20. What is the output of SIGN function?
1 for positive value,
0 for Zero,
-1 for Negative value.

21. What is the maximum number of triggers, can apply to a single table?
12 triggers.

Interview Questions for Oracle, DBA, Developer Candidates

PL/SQL Questions:

1. Describe the difference between a procedure, function and anonymous pl/sql block.

Level: Low

Expected answer : Candidate should mention use of DECLARE statement, a function must return a value while a procedure doesn?t have to.

2. What is a mutating table error and how can you get around it?

Level: Intermediate

Expected answer: This happens with triggers. It occurs because the trigger is trying to update a row it is currently using. The usual fix involves either use of views or temporary tables so the database is selecting from one while updating the other.

3. Describe the use of %ROWTYPE and %TYPE in PL/SQL

Level: Low

Expected answer: %ROWTYPE allows you to associate a variable with an entire table row. The %TYPE associates a variable with a single column type.

4. What packages (if any) has Oracle provided for use by developers?

Level: Intermediate to high

Expected answer: Oracle provides the DBMS_ series of packages. There are many which developers should be aware of such as DBMS_SQL, DBMS_PIPE, DBMS_TRANSACTION, DBMS_LOCK, DBMS_ALERT, DBMS_OUTPUT, DBMS_JOB, DBMS_UTILITY, DBMS_DDL, UTL_FILE. If they can mention a few of these and describe how they used them, even better. If they include the SQL routines provided by Oracle, great, but not really what was asked.

5. Describe the use of PL/SQL tables

Level: Intermediate

Expected answer: PL/SQL tables are scalar arrays that can be referenced by a binary integer. They can be used to hold values for use in later queries or calculations. In Oracle 8 they will be able to be of the %ROWTYPE designation, or RECORD.

6. When is a declare statement needed ?

Level: Low

The DECLARE statement is used in PL/SQL anonymous blocks such as with stand alone, non-stored PL/SQL procedures. It must come first in a PL/SQL stand alone file if it is used.

7. In what order should a open/fetch/loop set of commands in a PL/SQL block be implemented if you use the %NOTFOUND cursor variable in the exit when statement? Why?

Level: Intermediate

Expected answer: OPEN then FETCH then LOOP followed by the exit when. If not specified in this order will result in the final return being done twice because of the way the %NOTFOUND is handled by PL/SQL.

8. What are SQLCODE and SQLERRM and why are they important for PL/SQL developers?

Level: Intermediate

Expected answer: SQLCODE returns the value of the error number for the last error encountered. The SQLERRM returns the actual error message for the last error encountered. They can be used in exception handling to report, or, store in an error log table, the error that occurred in the code. These are especially useful for the WHEN OTHERS exception.

9. How can you find within a PL/SQL block, if a cursor is open?

Level: Low

Expected answer: Use the %ISOPEN cursor status variable.

10. How can you generate debugging output from PL/SQL?

Level:Intermediate to high

Expected answer: Use the DBMS_OUTPUT package. Another possible method is to just use the SHOW ERROR command, but this only shows errors. The DBMS_OUTPUT package can be used to show intermediate results from loops and the status of variables as the procedure is executed. The new package UTL_FILE can also be used.

11. What are the types of triggers?

Level:Intermediate to high

Expected Answer: There are 12 types of triggers in PL/SQL that consist of combinations of the BEFORE, AFTER, ROW, TABLE, INSERT, UPDATE, DELETE and ALL key words:

BEFORE ALL ROW INSERT

AFTER ALL ROW INSERT

BEFORE INSERT

AFTER INSERT etc.

DBA:

1. Give one method for transferring a table from one schema to another:

Level:Intermediate

Expected Answer: There are several possible methods, export-import, CREATE TABLE... AS SELECT, or COPY.

2. What is the purpose of the IMPORT option IGNORE? What is it?s default setting?

Level: Low

Expected Answer: The IMPORT IGNORE option tells import to ignore "already exists" errors. If it is not specified the tables that already exist will be skipped. If it is specified, the error is ignored and the tables data will be inserted. The default value is N.

3. You have a rollback segment in a version 7.2 database that has expanded beyond optimal, how can it be restored to optimal?

Level: Low

Expected answer: Use the ALTER TABLESPACE ..... SHRINK command.

4. If the DEFAULT and TEMPORARY tablespace clauses are left out of a CREATE USER command what happens? Is this bad or good? Why?

Level: Low

Expected answer: The user is assigned the SYSTEM tablespace as a default and temporary tablespace. This is bad because it causes user objects and temporary segments to be placed into the SYSTEM tablespace resulting in fragmentation and improper table placement (only data dictionary objects and the system rollback segment should be in SYSTEM).

5. What are some of the Oracle provided packages that DBAs should be aware of?

Level: Intermediate to High

Expected answer: Oracle provides a number of packages in the form of the DBMS_ packages owned by the SYS user. The packages used by DBAs may include: DBMS_SHARED_POOL, DBMS_UTILITY, DBMS_SQL, DBMS_DDL, DBMS_SESSION, DBMS_OUTPUT and DBMS_SNAPSHOT. They may also try to answer with the UTL*.SQL or CAT*.SQL series of SQL procedures. These can be viewed as extra credit but aren?t part of the answer.

6. What happens if the constraint name is left out of a constraint clause?

Level: Low

Expected answer: The Oracle system will use the default name of SYS_Cxxxx where xxxx is a system generated number. This is bad since it makes tracking which table the constraint belongs to or what the constraint does harder.

7. What happens if a tablespace clause is left off of a primary key constraint clause?

Level: Low

Expected answer: This results in the index that is automatically generated being placed in then users default tablespace. Since this will usually be the same tablespace as the table is being created in, this can cause serious performance problems.

8. What is the proper method for disabling and re-enabling a primary key constraint?

Level: Intermediate

Expected answer: You use the ALTER TABLE command for both. However, for the enable clause you must specify the USING INDEX and TABLESPACE clause for primary keys.

9. What happens if a primary key constraint is disabled and then enabled without fully specifying the index clause?

Level: Intermediate

Expected answer: The index is created in the user?s default tablespace and all sizing information is lost. Oracle doesn?t store this information as a part of the constraint definition, but only as part of the index definition, when the constraint was disabled the index was dropped and the information is gone.

10. (On UNIX) When should more than one DB writer process be used? How many should be used?

Level: High

Expected answer: If the UNIX system being used is capable of asynchronous IO then only one is required, if the system is not capable of asynchronous IO then up to twice the number of disks used by Oracle number of DB writers should be specified by use of the db_writers initialization parameter.

11. You are using hot backup without being in archivelog mode, can you recover in the event of a failure? Why or why not?

Level: High

Expected answer: You can?t use hot backup without being in archivelog mode. So no, you couldn?t recover.

12. What causes the "snapshot too old" error? How can this be prevented or mitigated?

Level: Intermediate

Expected answer: This is caused by large or long running transactions that have either wrapped onto their own rollback space or have had another transaction write on part of their rollback space. This can be prevented or mitigated by breaking the transaction into a set of smaller transactions or increasing the size of the rollback segments and their extents.

13. How can you tell if a database object is invalid?

Level: Low

Expected answer: By checking the status column of the DBA_, ALL_ or USER_OBJECTS views, depending upon whether you own or only have permission on the view or are using a DBA account.

14. A user is getting an ORA-00942 error yet you know you have granted them permission on the table, what else should you check?

Level: Low

Expected answer: You need to check that the user has specified the full name of the object (select empid from scott.emp; instead of select empid from emp;) or has a synonym that points to the object (create synonym emp for scott.emp;)

15. A developer is trying to create a view and the database won?t let him. He has the "DEVELOPER" role which has the "CREATE VIEW" system privilege and SELECT grants on the tables he is using, what is the problem?

Level: Intermediate

Expected answer: You need to verify the developer has direct grants on all tables used in the view. You can?t create a stored object with grants given through views.

16. If you have an example table, what is the best way to get sizing data for the production table implementation?

Level: Intermediate

Expected answer: The best way is to analyze the table and then use the data provided in the DBA_TABLES view to get the average row length and other pertinent data for the calculation. The quick and dirty way is to look at the number of blocks the table is actually using and ratio the number of rows in the table to its number of blocks against the number of expected rows.

17. How can you find out how many users are currently logged into the database? How can you find their operating system id?

Level: high

Expected answer: There are several ways. One is to look at the v$session or v$process views. Another way is to check the current_logins parameter in the v$sysstat view. Another if you are on UNIX is to do a "ps -ef|grep oracle|wc -l? command, but this only works against a single instance installation.

18. A user selects from a sequence and gets back two values, his select is:

SELECT pk_seq.nextval FROM dual;

What is the problem?

Level: Intermediate

Expected answer: Somehow two values have been inserted into the dual table. This table is a single row, single column table that should only have one value in it.

19. How can you determine if an index needs to be dropped and rebuilt?

Level: Intermediate

Expected answer: Run the ANALYZE INDEX command on the index to validate its structure and then calculate the ratio of LF_BLK_LEN/LF_BLK_LEN+BR_BLK_LEN and if it isn?t near 1.0 (i.e. greater than 0.7 or so) then the index should be rebuilt. Or if the ratio

BR_BLK_LEN/ LF_BLK_LEN+BR_BLK_LEN is nearing 0.3.

SQL/ SQLPlus

1. How can variables be passed to a SQL routine?

Level: Low

Expected answer: By use of the & symbol. For passing in variables the numbers 1-8 can be used (&1, &2,...,&8) to pass the values after the command into the SQLPLUS session. To be prompted for a specific variable, place the ampersanded variable in the code itself:

"select * from dba_tables where owner=&owner_name;" . Use of double ampersands tells SQLPLUS to resubstitute the value for each subsequent use of the variable, a single ampersand will cause a reprompt for the value unless an ACCEPT statement is used to get the value from the user.

2. You want to include a carriage return/linefeed in your output from a SQL script, how can you do this?

Level: Intermediate to high

Expected answer: The best method is to use the CHR() function (CHR(10) is a return/linefeed) and the concatenation function "||". Another method, although it is hard to document and isn?t always portable is to use the return/linefeed as a part of a quoted string.

3. How can you call a PL/SQL procedure from SQL?

Level: Intermediate

Expected answer: By use of the EXECUTE (short form EXEC) command.

4. How do you execute a host operating system command from within SQL?

Level: Low

Expected answer: By use of the exclamation point "!" (in UNIX and some other OS) or the HOST (HO) command.

5. You want to use SQL to build SQL, what is this called and give an example

Level: Intermediate to high

Expected answer: This is called dynamic SQL. An example would be:

set lines 90 pages 0 termout off feedback off verify off

spool drop_all.sql

select ?drop user ?||username||? cascade;? from dba_users

where username not in ("SYS?,?SYSTEM?);

spool off

Essentially you are looking to see that they know to include a command (in this case DROP USER...CASCADE;) and that you need to concatenate using the ?||? the values selected from the database.

6. What SQLPlus command is used to format output from a select?

Level: low

Expected answer: This is best done with the COLUMN command.

7. You want to group the following set of select returns, what can you group on?

Max(sum_of_cost), min(sum_of_cost), count(item_no), item_no

Level: Intermediate

Expected answer: The only column that can be grouped on is the "item_no" column, the rest have aggregate functions associated with them.

8. What special Oracle feature allows you to specify how the cost based system treats a SQL statement?

Level: Intermediate to high

Expected answer: The COST based system allows the use of HINTs to control the optimizer path selection. If they can give some example hints such as FIRST ROWS, ALL ROWS, USING INDEX, STAR, even better.

9. You want to determine the location of identical rows in a table before attempting to place a unique index on the table, how can this be done?

Level: High

Expected answer: Oracle tables always have one guaranteed unique column, the rowid column. If you use a min/max function against your rowid and then select against the proposed primary key you can squeeze out the rowids of the duplicate rows pretty quick. For example:

select rowid from emp e

where e.rowid > (select min(x.rowid)

from emp x

where x.emp_no = e.emp_no);

In the situation where multiple columns make up the proposed key, they must all be used in the where clause.

10. What is a Cartesian product?

Level: Low

Expected answer: A Cartesian product is the result of an unrestricted join of two or more tables. The result set of a three table Cartesian product will have x * y * z number of rows where x, y, z correspond to the number of rows in each table involved in the join.

11. You are joining a local and a remote table, the network manager complains about the traffic involved, how can you reduce the network traffic?

Level: High

Expected answer: Push the processing of the remote data to the remote instance by using a view to pre-select the information for the join. This will result in only the data required for the join being sent across.

12. What is the default ordering of an ORDER BY clause in a SELECT statement?

Level: Low

Expected answer: Ascending

13. What is tkprof and how is it used?

Level: Intermediate to high

Expected answer: The tkprof tool is a tuning tool used to determine cpu and execution times for SQL statements. You use it by first setting timed_statistics to true in the initialization file and then turning on tracing for either the entire database via the sql_trace parameter or for the session using the ALTER SESSION command. Once the trace file is generated you run the tkprof tool against the trace file and then look at the output from the tkprof tool. This can also be used to generate explain plan output.

14. What is explain plan and how is it used?

Level: Intermediate to high

Expected answer: The EXPLAIN PLAN command is a tool to tune SQL statements. To use it you must have an explain_table generated in the user you are running the explain plan for. This is created using the utlxplan.sql script. Once the explain plan table exists you run the explain plan command giving as its argument the SQL statement to be explained. The explain_plan table is then queried to see the execution plan of the statement. Explain plans can also be run using tkprof.

15. How do you set the number of lines on a page of output? The width?

Level: Low

Expected answer: The SET command in SQLPLUS is used to control the number of lines generated per page and the width of those lines, for example SET PAGESIZE 60 LINESIZE 80 will generate reports that are 60 lines long with a line width of 80 characters. The PAGESIZE and LINESIZE options can be shortened to PAGES and LINES.

16. How do you prevent output from coming to the screen?

Level: Low

Expected answer: The SET option TERMOUT controls output to the screen. Setting TERMOUT OFF turns off screen output. This option can be shortened to TERM.

17. How do you prevent Oracle from giving you informational messages during and after a SQL statement execution?

Level: Low

Expected answer: The SET options FEEDBACK and VERIFY can be set to OFF.

18. How do you generate file output from SQL?

Level: Low

Expected answer: By use of the SPOOL command

Tuning Questions:

1. A tablespace has a table with 30 extents in it. Is this bad? Why or why not.

Level: Intermediate

Expected answer: Multiple extents in and of themselves aren?t bad. However if you also have chained rows this can hurt performance.

2. How do you set up tablespaces during an Oracle installation?

Level: Low

Expected answer: You should always attempt to use the Oracle Flexible Architecture standard or another partitioning scheme to ensure proper separation of SYSTEM, ROLLBACK, REDO LOG, DATA, TEMPORARY and INDEX segments.

3. You see multiple fragments in the SYSTEM tablespace, what should you check first?

Level: Low

Expected answer: Ensure that users don?t have the SYSTEM tablespace as their TEMPORARY or DEFAULT tablespace assignment by checking the DBA_USERS view.

4. What are some indications that you need to increase the SHARED_POOL_SIZE parameter?

Level: Intermediate

Expected answer: Poor data dictionary or library cache hit ratios, getting error ORA-04031. Another indication is steadily decreasing performance with all other tuning parameters the same.

5. What is the general guideline for sizing db_block_size and db_multi_block_read for an application that does many full table scans?

Level: High

Expected answer: Oracle almost always reads in 64k chunks. The two should have a product equal to 64 or a multiple of 64.

6. What is the fastest query method for a table?

Level: Intermediate

Expected answer: Fetch by rowid

7. Explain the use of TKPROF? What initialization parameter should be turned on to get full TKPROF output?

Level: High

8. When looking at v$sysstat you see that sorts (disk) is high. Is this bad or good? If bad -How do you correct it?

Level: Intermediate

Expected answer: If you get excessive disk sorts this is bad. This indicates you need to tune the sort area parameters in the initialization files. The major sort are parameter is the SORT_AREA_SIZe parameter.

9. When should you increase copy latches? What parameters control copy latches?

Level: high

Expected answer: When you get excessive contention for the copy latches as shown by the "redo copy" latch hit ratio. You can increase copy latches via the initialization parameter LOG_SIMULTANEOUS_COPIES to twice the number of CPUs on your system.

10. Where can you get a list of all initialization parameters for your instance? How about an indication if they are default settings or have been changed?

Level: Low

Expected answer: You can look in the init.ora file for an indication of manually set parameters. For all parameters, their value and whether or not the current value is the default value, look in the v$parameter view.

11. Describe hit ratio as it pertains to the database buffers. What is the difference between instantaneous and cumulative hit ratio and which should be used for tuning?

Level: Intermediate

Expected answer: The hit ratio is a measure of how many times the database was able to read a value from the buffers verses how many times it had to re-read a data value from the disks. A value greater than 80-90% is good, less could indicate problems. If you simply take the ratio of existing parameters this will be a cumulative value since the database started. If you do a comparison between pairs of readings based on some arbitrary time span, this is the instantaneous ratio for that time span. Generally speaking an instantaneous reading gives more valuable data since it will tell you what your instance is doing for the time it was generated over.

12. Discuss row chaining, how does it happen? How can you reduce it? How do you correct it?

Level: high

Expected answer: Row chaining occurs when a VARCHAR2 value is updated and the length of the new value is longer than the old value and won?t fit in the remaining block space. This results in the row chaining to another block. It can be reduced by setting the storage parameters on the table to appropriate values. It can be corrected by export and import of the effected table.

13. When looking at the estat events report you see that you are getting busy buffer waits. Is this bad? How can you find what is causing it?

Level: high

Expected answer: Buffer busy waits could indicate contention in redo, rollback or data blocks. You need to check the v$waitstat view to see what areas are causing the problem. The value of the "count" column tells where the problem is, the "class" column tells you with what. UNDO is rollback segments, DATA is data base buffers.

14. If you see contention for library caches how can you fix it?

Level: Intermediate

Expected answer: Increase the size of the shared pool.

15. If you see statistics that deal with "undo" what are they really talking about?

Level: Intermediate

Expected answer: Rollback segments and associated structures.

16. If a tablespace has a default pctincrease of zero what will this cause (in relationship to the smon process)?

Level: High

Expected answer: The SMON process won?t automatically coalesce its free space fragments.

17. If a tablespace shows excessive fragmentation what are some methods to defragment the tablespace? (7.1,7.2 and 7.3 only)

Level: High

Expected answer: In Oracle 7.0 to 7.2 The use of the 'alter session set events 'immediate trace name coalesce level ts#';? command is the easiest way to defragment contiguous free space fragmentation. The ts# parameter corresponds to the ts# value found in the ts$ SYS table. In version 7.3 the ?alter tablespace coalesce;? is best. If the free space isn?t contiguous then export, drop and import of the tablespace contents may be the only way to reclaim non-contiguous free space.

18. How can you tell if a tablespace has excessive fragmentation?

Level: Intermediate

If a select against the dba_free_space table shows that the count of a tablespaces extents is greater than the count of its data files, then it is fragmented.

19. You see the following on a status report:

redo log space requests 23

redo log space wait time 0

Is this something to worry about? What if redo log space wait time is high? How can you fix this?

Level: Intermediate

Expected answer: Since the wait time is zero, no. If the wait time was high it might indicate a need for more or larger redo logs.

20. What can cause a high value for recursive calls? How can this be fixed?

Level: High

Expected answer: A high value for recursive calls is cause by improper cursor usage, excessive dynamic space management actions, and or excessive statement re-parses. You need to determine the cause and correct it By either relinking applications to hold cursors, use proper space management techniques (proper storage and sizing) or ensure repeat queries are placed in packages for proper reuse.

21. If you see a pin hit ratio of less than 0.8 in the estat library cache report is this a problem? If so, how do you fix it?

Level: Intermediate

Expected answer: This indicate that the shared pool may be too small. Increase the shared pool size.

22. If you see the value for reloads is high in the estat library cache report is this a matter for concern?

Level: Intermediate

Expected answer: Yes, you should strive for zero reloads if possible. If you see excessive reloads then increase the size of the shared pool.

23. You look at the dba_rollback_segs view and see that there is a large number of shrinks and they are of relatively small size, is this a problem? How can it be fixed if it is a problem?

Level: High

Expected answer: A large number of small shrinks indicates a need to increase the size of the rollback segment extents. Ideally you should have no shrinks or a small number of large shrinks. To fix this just increase the size of the extents and adjust optimal accordingly.

24. You look at the dba_rollback_segs view and see that you have a large number of wraps is this a problem?

Level: High

Expected answer: A large number of wraps indicates that your extent size for your rollback segments are probably too small. Increase the size of your extents to reduce the number of wraps. You can look at the average transaction size in the same view to get the information on transaction size.

25. In a system with an average of 40 concurrent users you get the following from a query on rollback extents:

ROLLBACK CUR EXTENTS

--------------------- --------------------------

R01 11

R02 8

R03 12

R04 9

SYSTEM 4

You have room for each to grow by 20 more extents each. Is there a problem? Should you take any action?

Level: Intermediate

Expected answer: No there is not a problem. You have 40 extents showing and an average of 40 concurrent users. Since there is plenty of room to grow no action is needed.

26. You see multiple extents in the temporary tablespace. Is this a problem?

Level: Intermediate

Expected answer: As long as they are all the same size this isn?t a problem. In fact, it can even improve performance since Oracle won?t have to create a new extent when a user needs one.

Installation/Configuration

1. Define OFA.

Level: Low

Expected answer: OFA stands for Optimal Flexible Architecture. It is a method of placing directories and files in an Oracle system so that you get the maximum flexibility for future tuning and file placement.

2. How do you set up your tablespace on installation?

Level: Low

Expected answer: The answer here should show an understanding of separation of redo and rollback, data and indexes and isolation os SYSTEM tables from other tables. An example would be to specify that at least 7 disks should be used for an Oracle installation so that you can place SYSTEM tablespace on one, redo logs on two (mirrored redo logs) the TEMPORARY tablespace on another, ROLLBACK tablespace on another and still have two for DATA and INDEXES. They should indicate how they will handle archive logs and exports as well. As long as they have a logical plan for combining or further separation more or less disks can be specified.

3. What should be done prior to installing Oracle (for the OS and the disks)?

Level: Low

Expected Answer: adjust kernel parameters or OS tuning parameters in accordance with installation guide. Be sure enough contiguous disk space is available.

4. You have installed Oracle and you are now setting up the actual instance. You have been waiting an hour for the initialization script to finish, what should you check first to determine if there is a problem?

Level: Intermediate to high

Expected Answer: Check to make sure that the archiver isn?t stuck. If archive logging is turned on during install a large number of logs will be created. This can fill up your archive log destination causing Oracle to stop to wait for more space.

5. When configuring SQLNET on the server what files must be set up?

Level: Intermediate

Expected answer: INITIALIZATION file, TNSNAMES.ORA file, SQLNET.ORA file

6. When configuring SQLNET on the client what files need to be set up?

Level: Intermediate

Expected answer: SQLNET.ORA, TNSNAMES.ORA

7. What must be installed with ODBC on the client in order for it to work with Oracle?

Level: Intermediate

Expected answer: SQLNET and PROTOCOL (for example: TCPIP adapter) layers of the transport programs.

8. You have just started a new instance with a large SGA on a busy existing server. Performance is terrible, what should you check for?

Level: Intermediate

Expected answer: The first thing to check with a large SGA is that it isn?t being swapped out.

9. What OS user should be used for the first part of an Oracle installation (on UNIX)?

Level: low

Expected answer: You must use root first.

10. When should the default values for Oracle initialization parameters be used as is?

Level: Low

Expected answer: Never

11. How many control files should you have? Where should they be located?

Level: Low

Expected answer: At least 2 on separate disk spindles. Be sure they say on separate disks, not just file systems.

12. How many redo logs should you have and how should they be configured for maximum recoverability?

Level: Intermediate

Expected answer: You should have at least three groups of two redo logs with the two logs each on a separate disk spindle (mirrored by Oracle). The redo logs should not be on raw devices on UNIX if it can be avoided.

13. You have a simple application with no "hot" tables (i.e. uniform IO and access requirements). How many disks should you have assuming standard layout for SYSTEM, USER, TEMP and ROLLBACK tablespaces?

Expected answer: At least 7, see disk configuration answer above.

Data Modeler:

1. Describe third normal form?

Level: Low

Expected answer: Something like: In third normal form all attributes in an entity are related to the primary key and only to the primary key

2. Is the following statement true or false:

"All relational databases must be in third normal form"

Why or why not?

Level: Intermediate

Expected answer: False. While 3NF is good for logical design most databases, if they have more than just a few tables, will not perform well using full 3NF. Usually some entities will be denormalized in the logical to physical transfer process.

3. What is an ERD?

Level: Low

Expected answer: An ERD is an Entity-Relationship-Diagram. It is used to show the entities and relationships for a database logical model.

4. Why are recursive relationships bad? How do you resolve them?

Level: Intermediate

A recursive relationship (one where a table relates to itself) is bad when it is a hard relationship (i.e. neither side is a "may" both are "must") as this can result in it not being possible to put in a top or perhaps a bottom of the table (for example in the EMPLOYEE table you couldn?t put in the PRESIDENT of the company because he has no boss, or the junior janitor because he has no subordinates). These type of relationships are usually resolved by adding a small intersection entity.

5. What does a hard one-to-one relationship mean (one where the relationship on both ends is "must")?

Level: Low to intermediate

Expected answer: This means the two entities should probably be made into one entity.

6. How should a many-to-many relationship be handled?

Level: Intermediate

Expected answer: By adding an intersection entity table

7. What is an artificial (derived) primary key? When should an artificial (or derived) primary key be used?

Level: Intermediate

Expected answer: A derived key comes from a sequence. Usually it is used when a concatenated key becomes too cumbersome to use as a foreign key.

8. When should you consider denormalization?

Level: Intermediate

Expected answer: Whenever performance analysis indicates it would be beneficial to do so without compromising data integrity.

UNIX:

1. How can you determine the space left in a file system?

Level: Low

Expected answer: There are several commands to do this: du, df, or bdf

2. How can you determine the number of SQLNET users logged in to the UNIX system?

Level: Intermediate

Expected answer: SQLNET users will show up with a process unique name that begins with oracle, if you do a ps -ef|grep oracle|wc -l you can get a count of the number of users.

3. What command is used to type files to the screen?

Level: Low

Expected answer: cat, more, pg

4. What command is used to remove a file?

Level: Low

Expected answer: rm

5. Can you remove an open file under UNIX?

Level: Low

Expected answer: yes

6. How do you create a decision tree in a shell script?

Level: intermediate

Expected answer: depending on shell, usually a case-esac or an if-endif or fi structure

7. What is the purpose of the grep command?

Level: Low

Expected answer: grep is a string search command that parses the specified string from the specified file or files

8. The system has a program that always includes the word nocomp in its name, how can you determine the number of processes that are using this program?

Level: intermediate

Expected answer: ps -ef|grep *nocomp*|wc -l

9. What is an inode?

Level: Intermediate

Expected answer: an inode is a file status indicator. It is stored in both disk and memory and tracts file status. There is one inode for each file on the system.

10. The system administrator tells you that the system hasn?t been rebooted in 6 months, should he be proud of this?

Level: High

Expected answer: Maybe. Some UNIX systems don?t clean up well after themselves. Inode problems and dead user processes can accumulate causing possible performance and corruption problems. Most UNIX systems should have a scheduled periodic reboot so file systems can be checked and cleaned and dead or zombie processes cleared out.

11. What is redirection and how is it used?

Level: Intermediate

Expected answer: redirection is the process by which input or output to or from a process is redirected to another process. This can be done using the pipe symbol "|", the greater than symbol ">" or the "tee" command. This is one of the strengths of UNIX allowing the output from one command to be redirected directly into the input of another command.

12. How can you find dead processes?

Level: Intermediate

Expected answer: ps -ef|grep zombie -- or -- who -d depending on the system.

13. How can you find all the processes on your system?

Level: Low

Expected answer: Use the ps command

14. How can you find your id on a system?

Level: Low

Expected answer: Use the "who am i" command.

15. What is the finger command?

Level: Low

Expected answer: The finger command uses data in the passwd file to give information on system users.

16. What is the easiest method to create a file on UNIX?

Level: Low

Expected answer: Use the touch command

17. What does >> do?

Level: Intermediate

Expected answer: The ">>" redirection symbol appends the output from the command specified into the file specified. The file must already have been created.

18. If you aren?t sure what command does a particular UNIX function what is the best way to determine the command?

Expected answer: The UNIX man -k command will search the man pages for the value specified. Review the results from the command to find the command of interest.

Oracle Troubleshooting:

1. How can you determine if an Oracle instance is up from the operating system level?

Level: Low

Expected answer: There are several base Oracle processes that will be running on multi-user operating systems, these will be smon, pmon, dbwr and lgwr. Any answer that has them using their operating system process showing feature to check for these is acceptable. For example, on UNIX a ps -ef|grep dbwr will show what instances are up.

2. Users from the PC clients are getting messages indicating :

Level: Low

ORA-06114: (Cnct err, can't get err txt. See Servr Msgs & Codes Manual)

What could the problem be?

Expected answer: The instance name is probably incorrect in their connection string.

3. Users from the PC clients are getting the following error stack:

Level: Low

ERROR: ORA-01034: ORACLE not available

ORA-07318: smsget: open error when opening sgadef.dbf file.

HP-UX Error: 2: No such file or directory

What is the probable cause?

Expected answer: The Oracle instance is shutdown that they are trying to access, restart the instance.

4. How can you determine if the SQLNET process is running for SQLNET V1? How about V2?

Level: Low

Expected answer: For SQLNET V1 check for the existence of the orasrv process. You can use the command "tcpctl status" to get a full status of the V1 TCPIP server, other protocols have similar command formats. For SQLNET V2 check for the presence of the LISTENER process(s) or you can issue the command "lsnrctl status".

5. What file will give you Oracle instance status information? Where is it located?

Level: Low

Expected answer: The alert.ora log. It is located in the directory specified by the background_dump_dest parameter in the v$parameter table.

6. Users aren?t being allowed on the system. The following message is received:

Level: Intermediate

ORA-00257 archiver is stuck. Connect internal only, until freed

What is the problem?

Expected answer: The archive destination is probably full, backup the archive logs and remove them and the archiver will re-start.

7. Where would you look to find out if a redo log was corrupted assuming you are using Oracle mirrored redo logs?

Level: Intermediate

Expected answer: There is no message that comes to the SQLDBA or SRVMGR programs during startup in this situation, you must check the alert.log file for this information.

8. You attempt to add a datafile and get:

Level: Intermediate

ORA-01118: cannot add anymore datafiles: limit of 40 exceeded

What is the problem and how can you fix it?

Expected answer: When the database was created the db_files parameter in the initialization file was set to 40. You can shutdown and reset this to a higher value, up to the value of MAX_DATAFILES as specified at database creation. If the MAX_DATAFILES is set to low, you will have to rebuild the control file to increase it before proceeding.

9. You look at your fragmentation report and see that smon hasn?t coalesced any of you tablespaces, even though you know several have large chunks of contiguous free extents. What is the problem?

Level: High

Expected answer: Check the dba_tablespaces view for the value of pct_increase for the tablespaces. If pct_increase is zero, smon will not coalesce their free space.

10. Your users get the following error:

Level: Intermediate

ORA-00055 maximum number of DML locks exceeded

What is the problem and how do you fix it?

Expected answer: The number of DML Locks is set by the initialization parameter DML_LOCKS. If this value is set to low (which it is by default) you will get this error. Increase the value of DML_LOCKS. If you are sure that this is just a temporary problem, you can have them wait and then try again later and the error should clear.

11. You get a call from you backup DBA while you are on vacation. He has corrupted all of the control files while playing with the ALTER DATABASE BACKUP CONTROLFILE command. What do you do?

Level: High

Expected answer: As long as all datafiles are safe and he was successful with the BACKUP controlfile command you can do the following:

CONNECT INTERNAL

STARTUP MOUNT

(Take any read-only tablespaces offline before next step ALTER DATABASE DATAFILE .... OFFLINE;)

RECOVER DATABASE USING BACKUP CONTROLFILE

ALTER DATABASE OPEN RESETLOGS;

(bring read-only tablespaces back online)

Shutdown and backup the system, then restart

If they have a recent output file from the ALTER DATABASE BACKUP CONTROL FILE TO TRACE; command, they can use that to recover as well.

If no backup of the control file is available then the following will be required:

CONNECT INTERNAL

STARTUP NOMOUNT

CREATE CONTROL FILE .....;

However, they will need to know all of the datafiles, logfiles, and settings for MAXLOGFILES, MAXLOGMEMBERS, MAXLOGHISTORY, MAXDATAFILES for the database to use the command.

Which of the following statements is true about implicit cursors?

Implicit cursors are used for SQL statements that are not named.
Developers should use implicit cursors with great care.
Implicit cursors are used in cursor for loops to handle data processing.
Implicit cursors are no longer a feature in Oracle.

Which of the following is not a feature of a cursor FOR loop?

Record type declaration.
Opening and parsing of SQL statements.
Fetches records from cursor.
Requires exit condition to be defined.

A developer would like to use referential datatype declaration on a variable. The variable name is EMPLOYEE_LASTNAME, and the corresponding table and column is EMPLOYEE, and LNAME, respectively. How would the developer define this variable using referential datatypes?

Use employee.lname%type.
Use employee.lname%rowtype.
Look up datatype for EMPLOYEE column on LASTNAME table and use that.
Declare it to be type LONG.

Which three of the following are implicit cursor attributes?

%found
%too_many_rows
%notfound
%rowcount
%rowtype

If left out, which of the following would cause an infinite loop to occur in a simple loop?

LOOP
END LOOP
IF-THEN
EXIT

Which line in the following statement will produce an error?

cursor action_cursor is
select name, rate, action
into action_record
from action_table;
There are no errors in this statement.

The command used to open a CURSOR FOR loop is

open
fetch
parse
None, cursor for loops handle cursor opening implicitly.

What happens when rows are found using a FETCH statement

It causes the cursor to close
It causes the cursor to open
It loads the current row values into variables
It creates the variables to hold the current row values

Read the following code:

10.         CREATE OR REPLACE PROCEDURE find_cpt

11.         (v_movie_id {Argument Mode} NUMBER, v_cost_per_ticket {argument mode} NUMBER)

12.         IS

13.         BEGIN

14.           IF v_cost_per_ticket  > 8.5 THEN

15.         SELECT  cost_per_ticket

16.         INTO            v_cost_per_ticket

17.         FROM            gross_receipt

18.         WHERE   movie_id = v_movie_id;

19.           END IF;

20.         END;

Which mode should be used for V_COST_PER_TICKET?

IN
OUT
RETURN
IN OUT

Read the following code:

22.         CREATE OR REPLACE TRIGGER update_show_gross

23.               {trigger information}

24.              BEGIN

25.               {additional code}

26.              END;

The trigger code should only execute when the column, COST_PER_TICKET, is greater than $3. Which trigger information will you add?

WHEN (new.cost_per_ticket > 3.75)
WHEN (:new.cost_per_ticket > 3.75
WHERE (new.cost_per_ticket > 3.75)
WHERE (:new.cost_per_ticket > 3.75)

What is the maximum number of handlers processed before the PL/SQL block is exited when an exception occurs?

Only one
All that apply
All referenced
None

For which trigger timing can you reference the NEW and OLD qualifiers?

Statement and Row
Statement only
Row only
Oracle Forms trigger

Read the following code:

30.         CREATE OR REPLACE FUNCTION get_budget(v_studio_id IN NUMBER)

RETURN number IS

v_yearly_budget NUMBER;

BEGIN

SELECT yearly_budget

INTO v_yearly_budget

FROM studio

WHERE id = v_studio_id;

RETURN v_yearly_budget;

END;

Which set of statements will successfully invoke this function within SQL*Plus?

VARIABLE g_yearly_budget NUMBER
EXECUTE g_yearly_budget := GET_BUDGET(11);
VARIABLE g_yearly_budget NUMBER
EXECUTE :g_yearly_budget := GET_BUDGET(11);
VARIABLE :g_yearly_budget NUMBER
EXECUTE :g_yearly_budget := GET_BUDGET(11);
VARIABLE g_yearly_budget NUMBER
:g_yearly_budget := GET_BUDGET(11);

31.         CREATE OR REPLACE PROCEDURE update_theater

32.         (v_name IN VARCHAR v_theater_id IN NUMBER) IS

33.         BEGIN

34.                UPDATE  theater

35.                SET             name = v_name

36.                WHERE   id = v_theater_id;

37.         END update_theater;

38.

When invoking this procedure, you encounter the error:

ORA-000: Unique constraint(SCOTT.THEATER_NAME_UK) violated.

How should you modify the function to handle this error?

An user defined exception must be declared and associated with the error code and handled in the EXCEPTION section.
Handle the error in EXCEPTION section by referencing the error code directly.
Handle the error in the EXCEPTION section by referencing the UNIQUE_ERROR predefined exception.
Check for success by checking the value of SQL%FOUND immediately after the UPDATE statement.

Read the following code:

40.         CREATE OR REPLACE PROCEDURE calculate_budget IS

41.         v_budget        studio.yearly_budget%TYPE;

42.         BEGIN

43.                v_budget := get_budget(11);

44.                IF v_budget <>

45.                                        THEN

46.                        set_budget(11,30000000);

47.                END IF;

48.         END;

You are about to add an argument to CALCULATE_BUDGET. What effect will this have?

The GET_BUDGET function will be marked invalid and must be recompiled before the next execution.
The SET_BUDGET function will be marked invalid and must be recompiled before the next execution.
Only the CALCULATE_BUDGET procedure needs to be recompiled.
All three procedures are marked invalid and must be recompiled.

Which procedure can be used to create a customized error message?

RAISE_ERROR
SQLERRM
RAISE_APPLICATION_ERROR
RAISE_SERVER_ERROR

The CHECK_THEATER trigger of the THEATER table has been disabled. Which command can you issue to enable this trigger?

ALTER TRIGGER check_theater ENABLE;
ENABLE TRIGGER check_theater;
ALTER TABLE check_theater ENABLE check_theater;
ENABLE check_theater;

Examine this database trigger

52.         CREATE OR REPLACE TRIGGER prevent_gross_modification

53.         {additional trigger information}

54.         BEGIN

55.                IF TO_CHAR(sysdate, DY) = MON

56.                        THEN

57.                        RAISE_APPLICATION_ERROR(-20000,Gross receipts cannot be deleted on Monday);

58.                END IF;

59.         END;

This trigger must fire before each DELETE of the GROSS_RECEIPT table. It should fire only once for the entire DELETE statement. What additional information must you add?

BEFORE DELETE ON gross_receipt
AFTER DELETE ON gross_receipt
BEFORE (gross_receipt DELETE)
FOR EACH ROW DELETED FROM gross_receipt

Examine this function:

61.         CREATE OR REPLACE FUNCTION set_budget

62.         (v_studio_id IN NUMBER, v_new_budget IN NUMBER) IS

63.         BEGIN

64.                UPDATE  studio

65.                SET             yearly_budget = v_new_budget

       WHERE   id = v_studio_id;

IF SQL%FOUND THEN

RETURN TRUEl;

ELSE

RETURN FALSE;

END IF;

COMMIT;

END;

Which code must be added to successfully compile this function?

Add RETURN right before the IS keyword.
Add RETURN number right before the IS keyword.
Add RETURN boolean right after the IS keyword.
Add RETURN boolean right before the IS keyword.

Under which circumstance must you recompile the package body after recompiling the package specification?

Altering the argument list of one of the package constructs
Any change made to one of the package constructs
Any SQL statement change made to one of the package constructs
Removing a local variable from the DECLARE section of one of the package constructs

Procedure and Functions are explicitly executed. This is different from a database trigger. When is a database trigger executed?

When the transaction is committed
During the data manipulation statement
When an Oracle supplied package references the trigger
During a data manipulation statement and when the transaction is committed

Which Oracle supplied package can you use to output values and messages from database triggers, stored procedures and functions within SQL*Plus?

DBMS_DISPLAY
DBMS_OUTPUT
DBMS_LIST
DBMS_DESCRIBE

What occurs if a procedure or function terminates with failure without being handled?

Any DML statements issued by the construct are still pending and can be committed or rolled back.
Any DML statements issued by the construct are committed
Unless a GOTO statement is used to continue processing within the BEGIN section, the construct terminates.
The construct rolls back any DML statements issued and returns the unhandled exception to the calling environment.

Examine this code

71.         BEGIN

72.                theater_pck.v_total_seats_sold_overall := theater_pck.get_total_for_year;

73.         END;

For this code to be successful, what must be true?

Both the V_TOTAL_SEATS_SOLD_OVERALL variable and the GET_TOTAL_FOR_YEAR function must exist only in the body of the THEATER_PCK package.
Only the GET_TOTAL_FOR_YEAR variable must exist in the specification of the THEATER_PCK package.
Only the V_TOTAL_SEATS_SOLD_OVERALL variable must exist in the specification of the THEATER_PCK package.
Both the V_TOTAL_SEATS_SOLD_OVERALL variable and the GET_TOTAL_FOR_YEAR function must exist in the specification of the THEATER_PCK package.

A stored function must return a value based on conditions that are determined at runtime. Therefore, the SELECT statement cannot be hard-coded and must be created dynamically when the function is executed. Which Oracle supplied package will enable this feature?

DBMS_DDL
DBMS_DML
DBMS_SYN
DBMS_SQL

Sunday, July 13, 2008

OCP Support

Technical - UNIX

Patrocinados

Patrocinados

Archivo